Reproduction Parts

MISC. PARTS USED ON MOST PRE-1950 WURLITZER MODELS (and some newer models)

1  2  3  4  5  6  7 
<< First  <prev  Next >  Last >>

Part Number

Item Description Price Qty/Order
10-2313
Mechanism "Dog Trip" assembly
$15.00

10-2312
Mechanism trip wire for Wurlitzer 78RPM models.
$25.00

10-2311
Wurlitzer turntable drive clutch assembly w/o springs. For pre 1950 Wurlitzer mechanisms.
$30.00

10-2310
Wurlitzer turntable drive clutch assembly w/2 springs (#27168) For pre 1950 Wurlitzer mechanisms.
$40.00

10-2309
Standard turntable clutch drive spring - small bottom piece
$5.00

10-2308
Standard turntable clutch drive spring - large top piece
$7.50

10-2307
Brake bands for Wurlitzer mechanism (#31531)
$30.00

10-2306
Bushing for main cam on mech - 2 required, each
$7.50

10-2304
Stop rotary arm for 24 play Wurlitzer mechs(#30452)
$6.00

10-2303
Dog bone pin, rotary arm, fits in star wheel on 24 play Wurl mechs (#27754)
$12.00

10-2302
Star wheel, 24 play Wurlitzer mechs - Wurlitzer part #29077
$30.00

10-2299
Wurlitzer pre 1950 spring -turntable lift counterbalancing (#38395)
$7.50

10-2298
Stud, ring & washer for Wurlitzer 24 play mechanism turntable lift (#44889)
$8.00

10-2297
Wurlitzer 24 play mechanism oversize turntable lift needle bearing.
$30.00

10-2296
Special shoulder screw & washer to mount actuating lever bushing on pre 1950 Wurlitzer models.
$8.00

10-2295
Actuating lever bushing (roller) Wurlitzer #27790
$10.00

10-2294
Wurlitzer Mech roller bushing for heart-shaped cam-oversized .381 O.D.
$12.00

10-2293
Wurlitzer Mech. roller bushing for heart-shaped cam-standard .375 O.D. (#30521)
$12.00

10-2292
Main drive steel worm gear (Wurlitzer 00037)
$60.00

10-2291
Wurlitzer main drive shaft for steel worm gears (holes drilled) Pre 1250 models. Connects to the main drive motor.
$25.00

10-2288
Metal hand hold covers for most Wurlitzer backdoors, each
$7.50

10-2287
Spray adhesive-3M-77 for attaching grill cloth - 19 1/2 oz. can
$15.00

10-2286
Amplifier hook clamp
$5.00

10-2283
Metal bracket to mount rubber speaker bushings (angled 700-1080 style)
$6.00

10-2282
Speaker rubber bushings, each
$6.00

10-2281
Resistor elements for use in Wurlitzer 800/750/850/950 and 1015 bubble tube heater assemblies, each
$20.00

10-2279
Shielded cable-thick-for rewiring tonearms, per ft
$2.50

10-2278
Shielded cable-thin for rewiring tonearms, per ft.
$2.50

10-2276
Needle - Memory Makers pre-amp - 45 RPM
$50.00

10-2275
Needles for super sound kit - 78's
$60.00

10-2274
Needle for super sound kit - 45's
$60.00

10-2273
Cartridge adapter bracket(for Wurlitzer bear claw and lollipop style tonearms) to convert to lightweight ceramic cartridges.
$15.00

10-2272
Wurlitzer tnearm feed-in lever round weight for 16-24 play mechs for record trip. Wurl #22000
$7.50

10-2271
Tonearm latch plate plated
$9.00

10-2270
Tonearm rubber bushings, per pair
$9.00

10-2269
Counterweight for all Wurlitzer bear-claw tonearms (prewar 312-600 and 51-61 CT odels)
$30.00

10-2268
Counterweight for lollipop tonearm (Wurl 700-1080 and 41-71-81 CT models)
$40.00

10-2267
Tonearm 7 piece rear shaft kit (secures tonearm base to shell)
$20.00

10-2266
Wurlitzer tonearm needle adjusting post (goes into cast base attached to bearclaw/lollipop arm to adjust tonearm heigth) chrome plated.
$30.00

10-2265
Tonearm base - NOT chrome plated for lollipop and 500/600 bearclaw tonearms. NO DISCOUNT
$100.00

10-2264
Lollipop Wurlitzertonearm shell only-unplated-no weight/cartridge - with very minor flaw in metal. Not made anymore NO DISCOUNT
$125.00

1  2  3  4  5  6  7 
<< First  <prev  Next >  Last >>